Sand temperature regulator
This type of cooling equipment is a device for air selection and temperature adjustment of the crushed and screened old sand. The thermostat uses circulating cooling water, the consumption of which depends on the inlet temperature of the sand and the desired outlet temperature. The sand outlet temperature can be preset on the control cabinet.
- The distribution valve has uniform distribution and multi-stage series-connected air selection, the sorting effect is good, and the micropowder is ≤0.1%;
- The heat exchange area is large and the cooling effect is good, which can meet the process requirements;
- The equipment has a simple structure, few moving parts, low sand flow speed, less wear and no noise.
- The sand temperature can be preset and automatically controlled, or manually controlled according to the actual situation.
The main technical parameters
Technical parameters for J2S84 Series pneumatic pickup and temperature regulator
|Productivity||5～30 t/h||Air discharge capacity||4000m3/h|
|Inlet sand temperature||<200℃||Outlet sand temperature||30℃±5℃|
|Inlet water temperature||10℃ lower than outlet sand temperature||Compressed air||0.4~0.6MPa|
|Cooling principle||Adverse block-off type||control||Auto or manual|